Fabric Specifications

Face: 100% Vinyl

Backing: 100% Polyester

Weight: 28.0 oz. per linear yd

Thickness: 1.00 mm

Width: 54�

Directional: No

Railroaded: No

Performance Characteristics

Abrasion Resistance (ASTM D4157): 100,000 double rubs

Tensile Strength (CFFA-17): Warp: 79.4 lbs.

Fill: 56.0 lbs.

Tear Strength (CFFA-16): Warp: 12.7 lbs.

Fill: 10.4 lbs.

Colorfastness to Crocking (AATCC 8): Dry: 5.0

Wet: 5.0

UV (CFFA-2): 1,000 hours

Adhesion (CFFA-3): Warp: 13.0 lbs.

Fill: 12.3 lbs.

Blocking (CFFA-4): 1

Cold Crack (CFFA-6): -10� F

Flex (CFFA-10): 25,000 cycles

Flammability*

California Technical Bulletin 117 Section E: Passes

NFPA 260: Class 1

UFAC: Class 1

BIFMA CS-191-53, Sec. 3: Passes

BIFMA Upholstery, Sec. 4: Passes

Int'l Maritime Org., IMO A.652(16) 8.2: Passes

Int'l Maritime Org., IMO A.652(16) 8.3: Passes

FMVSS 302: Passes

Additional Attributes

Finish/Treatment: ResilienceSR

Anti-Bacterial: Yes

Anti-Microbial: Yes

Mildew Resistant: Yes

Bleach Cleanable: Yes

Ratio: 1:10

Sulfide Stain Resistant: Yes

ResilienceSR: Yes

Prompt cleaning is always recommended. Recommended cleaning steps are listed by type of stain. For best results follow cleaning steps in order. Recommended Care and Cleaning Steps STEP 1: Dirt, dust, grime Mild soap and water, then rinse with fresh water and wipe dry with a clean cloth. STEP 2: Organic oils, petroleum-based oils, ketchup, chocolate, coffee, tea, juice; after attempting Step 1 Wipe affected area with a soft cloth or soft bristle brush using a non-abrasive cleaner, for example Formula 409� or Fantastik�. Rinse with fresh water and wipe dry. STEP 3: Blood, urine, betadine, disinfectant, eye shadow/mascara, lipstick, crayon, grease, mustard, ink, permanent marker, paint; after attempting Steps 1 & 2 10% solution of household bleach and water. Rinse with fresh water and wipe dry. STEP 4: Remaining stains; after attempting steps 1-3. 25% solution of alcohol and water. Rinse with fresh water and wipe dry. STEP 5: Remaining stains; after attempting steps 1-4. 25% solution of lighter fluid or nail polish remover and water. Rinse with fresh water and wipe dry.

For Light soiling:

1. A solution of 10% household liquid dish soap with warm water applied with a soft damp cloth will remove most soiling.

2. If necessary, a solution of liquid cleanser and water applied with a soft bristle brush. Wipe away the residue with a water-dampened cloth.

________________________________________

For Heavier soiling not solved by above method:

1. Dampen a soft white cloth with lighter fluid (naphtha) and rub gently. Rinse with a water-dampened cloth.

NOTE: Use extreme caution with this method. Complete only in a well-ventilated area and away from any open flame.

NOTE: You should try this method on an inconspicuous spot before using it on the original stain/soiling.

________________________________________

For the most difficult stains not removed by the above methods:

1. Dampen a soft white cloth with a solution of household bleach (sodium hypochlorite); 10% bleach, 90% water.

2. Rub gently.

3. Rinse with a water-dampened cloth to remove bleach concentration.

4. If necessary, allow a 1:10 diluted bleach solution to puddle on the affected area or apply with a soaked cloth for approximately 30 minutes. Rinse with a water-dampened cloth to remove any remaining bleach concentration.

NOTE: You should try this method on an inconspicuous spot before using it on the original stain/soiling.

________________________________________

Note

To restore luster, a light coat of spray furniture wax can be used. Apply for 30 seconds and follow with a light buffing using a clean white cloth.

________________________________________

Antimicrobial

Naugahyde with Advanced BeautyGard provides outstanding protection in difficult medical and health care environments.

Contains agents effective against bacterial and fungal microorganisms.

________________________________________

Please Review Carefully

CAUTION: Should you desire to use other cleaning methods, carefully try them in an inconspicuous area to determine potential damage to the material. Never use harsh solvents or cleaners which are intended for industrial applications. To clean stained or soiled areas, a soft white cloth is recommended. Avoid use of paper towels.

CAUTION: Cleaning products may be harmful/irritating to your skin, eyes, etc.

Use protective gloves and eye protection. Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in a well ventilated area. Follow all product manufacturer�s warnings. Naugahyde cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.

________________________________________

Estimates are for 54" fabric with no visible repeats. More fabric may be needed when matching patterns. Yardages are approximate only and DIY Upholstery Supply / Charlebois Fabric cannot be held responsible for inaccurate information. BEDDING Twin Full Queen King Comforter 6 yds 7 yds 8 yds 12 yds Duvet Cover 5 yds 6 yds 8 yds 10 yds Bedspread 9 yds 10 yds 11 yds 15 yds Upholstered Headboard 3 1/2 yds 5 1/2 yds 6 yds 6 1/2 yds DUST RUFFLES Twin Full Queen King 14" drop (gathered or box pleats) 6 yds 6 1/2 yds 7 yds 7 yds 14" drop (tailored) 3 1/2 yds 4 yds 4 1/2 yds 4 1/2 yds 21" drop (gathered or box pleats) 8 1/2 yds 9 yds 10 yds 11 yds 21" drop (tailored) 5 1/2 yds 6 yds 6 1/4 yds 6 1/2 yds SHAMS Standard Queen King Flanged 4 yds 4 yds 5 yds Ruffled 6 yds 6 yds 7 yds PILLOWS 14-18" 19-24" 28-30" Corded 1/2 yd 1 yd 1 3/4 yds Ruffled 1 1/2 yds 2 yds 2 3/4 yds BATH Shower Curtain 6 yds Shower Valance 3 yds SLIP COVERS 2 Cushion Sofa 16 yds 3 Cushion Sofa 18 yds 6 Cushion Sofa 22 yds 2 Cushion Love Seat 13 yds 4 Cushion Love Seat 17 yds Wing Chair 11 yds Slipper Chair 4 yds Ottoman 3 1/2 yds BASIC DRAPERY PANELS To figure yardage for basic drapery panels, you will need the cut length (finished length + allowance for your desired hem and rod pocket size - NOTE: our workroom adds 16") x the number of panels you are making. If your selected fabric has a repeat, you will need 1 panel at the regular cut length and then you will need to add the number of inches in the repeat to each additional panel. Examples using standard 84" finished length panels: *Change the number of inches added for hems and rod pockets, as well as repeats, to suit your needs* Fabric with NO repeat: Panels - 84" + 16" = 100" each panel x 2 panels = 200" (5.625 yards / 6 yards to be safe) x 3 panels = 300" (8.33 yards / 9 yards to be safe) x 4 panels = 400" (11.125 yards / 12 yards to be safe) Fabric with a 27" repeat: 1st panel - 84" + 16" = 100" 2nd & additional panels - 84" + 16" + 27" = 127" x 2 panels = 227" (6.30 yards / 7 yards to be safe) x 3 panels = 354" (9.83 yards / 10 yards to be safe) x 4 panels = 481" (13.36 yards / 14 yards to be safe) NOTE: If you are making panels for additional windows, the number of inches in the repeat must be added to ALL remaining panels to continue matching them all to the very first panel.