Fabric Specifications
Content: 100%Polyester
Finish: None
Width: 56”
Repeat: None
Application: Non-Directional
Performance Characteristics
Abrasion Resistance (ASTM D4157): 120,000 double rubs
Fire Codes
UFAC - Upholstered Furniture Action Council
This test is often referred to as the (Cigarette Test) because the purpose is to classify the fabric on its propensity to resist cigarette ignition when tested in combination with a standard foam cushioning material. The candidate fabric is used to cover small pieces of a standard foam cushioning material. The test pieces (fabric over the foam) are placed on a small test rig, simulating a chair back and seat. A lighted cigarette is placed in the crevice where the back and the seat of the chair meet. To intensify the heat, the cigarette is covered by a piece of cotton sheeting fabric. This test records the extent of vertical burning (char length) on the back section of the seat assembly and whether or not ignition occurred.
Product Reviews
No one has reviewed Upholstery Fabric Slate yet. Be the first one and tell us what you think and share your opinions with others.
Please be sure to focus your comments on the product.
Cleaning Codes
Cleaning codes are established by the Joint Industry Fabric Standards Committee
Note: Pretest a small, inconspicuous area before proceeding with any step below. Clean spots or stains from the outside to the middle of the affected area, to prevent circling. Cushion covers should not be removed for laundering or dry cleaning. Hot water extraction or steam cleaning is not a recommended method of cleaning. Pile fabrics may require brushing with a nonmetallic, stiff bristle brush to restore appearance. To prevent overall soiling, frequent vacuuming or light brushing with a non-metallic, stiff brush to remove dust and grime is recommended. Overall cleaning by a professional furniture cleaning service only is recommended.
Cleaning Code: S
�
Spot clean only with a water-free dry cleaning solvent.
�
Do not saturate or use water.